4 inch Flare Width Tube Fenders for your TJ or LJ are shipped assembled and fully welded and sanded. Each side is assembled from (2) pieces of 1/8 inch steel plate and (1) 1 1/2 inch x .120 inch wall DOM tube. They bolt to the tub in 4 places at the firewall, to the inner fender in 6 places and to the grill.
They were designed in 3D modeling software to follow the contours of the hood and still provide protection against trees and limbs. The contour of the hood is offset 6 inch to the outside of the flare (flare is only 4 inch wide at the back) to protect it from the tires in compression or articulation or other obstacles.
The fender top also gives the hood latches a place to live. Fender clearance is increased by about an inch from the best clearance spots in the factory fender. The fender is 1 1/2 inch tall from the grill to the curve at the rear of the fender.
You will have to modify your factory fenders to install these new rock fenders, however you will maintain full engine bay protection unlike some other tube fenders.
- 4 Inch Flare Width Tube Fenders
- Assembled from (2) pieces of 1/8 inch steel plate
- 1 1/2 inch tall from the grill to the curve at the rear of the fender
Other DetailsLifetime Against Defect
CALIFORNIA WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov